![]() ![]() No, but you can use Sentry’s GPS to record Track Logs within ForeFlight. DOES SENTRY INCLUDE A FLIGHT DATA RECORDER? Sentry supports up to 5 simultaneous device connections to its Wi-Fi network. HOW MANY DEVICE CONNECTIONS DOES SENTRY SUPPORT? Yes, using its built-in barometer, Sentry can display cabin pressure and pressure altitude in ForeFlight Mobile’s Instrument Panel on the Maps view. DOES SENTRY HAVE BAROMETRIC PRESSURE SENSOR? Tap Calibrate AHRS to open the AHRS adjustment interface, tap Zero Pitch & Bank to zero the attitude indicator, then tap Done in the top-left to save the new calibration. You can calibrate Sentry’s AHRS while connected to it by tapping the attitude indicator button at the top of Maps to open Synthetic Vision, then tapping the gear button in the bottom-left corner to access the AHRS calibration options. Yes, Sentry has built-in digital AHRS to enhance the Synthetic Vision feature in ForeFlight Mobile. DOES SENTRY PROVIDE AHRS (BACKUP ATTITUDE) CAPABILITY? Yes, Sentry has a built-in WAAS GPS for the display GPS data in ForeFlight Mobile, including aircraft position, altitude, ground speed, and more. Yes, Sentry has onboard memory to support animating up to 30 minutes of radar in ForeFlight Mobile. DOES SENTRY PROVIDE A WEATHER REPLAY CAPABILITY? To turn off the alarm either press the power button or press the “Mute Sentry for 5m” button on the Device Status page. The LED will not change color, but the high-pitched alarm will sound. The CO Alarm can be triggered for testing purposes via the “Test CO Alarm” button on the Device Status page. To do this, use a 4mm hex key to remove the quick release adapter from Sentry and then you can screw in any other ¼”-20 bolt. Yes, Sentry can be used with any mount that has a ¼”-20 bolt (same as a standard camera tripod). See this article for an explanation of how ADS-B towers and ADS-B Out capability affects traffic picture. If you are not in range of any ADS-B towers, you will not see any weather in ForeFlight and your traffic picture will be limited to nearby ADS-B Out equipped aircraft. #Digital sentry client specifications windows#If your aircraft has an AC-heated front windshield, try mounting Sentry on any non-heated windows to see if reception improves.Īircraft Location: It is normal to receive little or no ADS-B tower reception below about 1,000 feet AGL since ADS-B signals depend on line of sight. Heated window solutions that utilize direct current (DC) do not block radio signals, by contrast. Sentry’s Location & Orientation: Mounting Sentry upright on a side window will provide the best reception, but if no side window is available you can also mount Sentry on the dash with the status lights towards the front of the aircraft.Īircraft Configuration: All ADS-B receivers have poor reception through alternating current (AC) heated windshields, as the construction of such windshields tends to block ADS-B signals. ![]() Reception is dependent on a number of factors, including Sentry’s location and orientation in the aircraft, aircraft configuration, and your aircraft’s location. HOW CAN I MAXIMIZE SENTRY’S INFLIGHT RECEPTION? See this article from iPad Pilot News for an explanation of how having ADS-B Out capability affects your traffic picture. The traffic displayed by Sentry may not represent all nearby traffic, especially if you have not yet installed an ADS-B Out transmitter in your aircraft. WILL I SEE ALL NEARBY TRAFFIC WHILE USING SENTRY? #Digital sentry client specifications portable#Scout, Sentry, and Stratus portable ADS-B receivers will support delivering these weather products to the ForeFlight display. ![]() In a future app release, ForeFlight Mobile will support the six new FIS-B weather products that the FAA is adding in 2018, including: Lightning, Turbulence, Icing, Cloud Tops, Graphical AIRMET, and Center Weather Advisories. ![]() Will Sentry support the new FIS-B weather products the FAA will introduce in 2018? Keep in mind that if your aircraft is not equipped with ADS-B Out, then you will have a limited view of traffic on ForeFlight.Īdditionally, Sentry has a dual-band ADS-B receiver, integrated CO monitor and alarm, up to 12 hours of continuous battery life, built-in WAAS GPS, backup attitude (AHRS), barometric pressure sensor, onboard memory for Weather Replay™, and supports up to 5 devices. Sentry can also receive air-to-air traffic information from ADS-B Out equipped aircraft and re-broadcast traffic information (ADS-R and TIS-B) from FAA ground towers. ADS-B ground station reception will usually not be available until airborne. When in proximity to a ground station, Sentry also receives FIS-B weather, NOTAMS, and TFR information. Sentry receives traffic information on both UAT (978 MHz) and 1090ES (1090 MHz). Yes, Sentry has internal antennas for both UAT (978 MHz) and 1090ES (1090 MHz) frequency bands. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |